The purchase of a smartphone is a very important issue in the life of each current user. It is suitable with a special seriousness, in order to take into account all their preferences and choose the most acceptable option, and the device itself includes trepidation and thrift. It would be a shame with the first days of the "run-in" of the new gadget to scratch the screen or damage it with an unexpected fall, right? To protect yourself and your purchase from such troubles uses protective shockproof glass. You can buy it on Aliexpress At an acceptable price, you only need to choose the appropriate size and shape. How to do it next.

Protective film with Aliexpress

Each sensible user of portable electronics tries to protect it from external adverse factors accompanying their use: scratches, chips, falls, moisture, dust, etc. One of the protective means of an older generation is protective film.

Distinguish 2 types of films for smartphones: glossy and matte.

The glossy film is more subject to the formation of glare during bright lighting or under the sun, while the matte has no such problems, but the matte contributes to the feeling of higher graininess than her glossy sister. In addition, the matte film does not remain prints. Another disadvantage of glossy is its exposure to scratches, which entails the quick loss of attractiveness of the appearance, fingerprints are more visible, rather than the second type of films.

According to the method of sticking, there are the following types of films:

• static;
• adhesive.

Static film is attached due to the slim silicone layer. Thus, it sticks to the clean surface of any device, without leaving air bubbles under it. Such a protective coating can be dismantled and cleaned, and then re-attach, there are no restrictions in the amount of crust. Therefore, with careful and gentle use, it can serve for quite a long time.

As for the films with the layer of glue, they are much more susceptible to the formation of air bubbles due to the falling of villi or dust. Yes, and after cleaning, they glue worse, so you need to be even more neat in use.

Next, we will tell you how to properly apply the screen on the smartphone screen:

1. First-way, you should thoroughly clean the screen from prints, dust and other contaminants. You can use special for this. wet wipes for electronics Or a conventional clean microfibrous cloth, moistened in alcohol or ordinary water to a state of wet.

Many films have special wet and dry napkins for cleaning the display in the kit.

2. Films to protect the screen from scratches have holes intended for the camera, microphone, dynamics and other sensors. To accurately combine everything, you can put the film with a tape with one of the sides to the phone case, then lift the film and remove the layer with the number 1. Remove it gradually, immediately smoothing the film and strengthened it to the screen. Try not to touch your fingers to the already open film, otherwise your imprint will be seen from the inside. It is important to expose the protective agent evenly from all sides.

3. After filming the film, you need to smooth off the film and drive all air bubbles. You can make it using a credit card or a special scraper in a set of film.

4. Next, remove the layer with the number 2. Everything is ready!

Protective glass on Aliexpress

The next stronger protective layer for the gadget display is safety glass.

The main difference of glasses from the film is a large thickness and, therefore, the level of protection is much higher. Thickness varies from 0.2 to 0.5 mm. The hardness is at 9n at a time as the 3H or 4N film. For those who wear a phone in your pocket, glass is quite perfectly coping with mechanical damage, as scratches from keys and trifles, drops on solid surfaces and protects the touch screen from breaking.

Protective tempered glass Consists of 5 layers:

• The locking layer is a layer of fine silicone, thanks to which the glass is securely attached to the display.
• The binding layer - he prevents the scattering of the fragments after the glass crashed.
• Anti-glare layer - it is a stabilizer of the image during bright lighting. Thanks to him, the quality of the image will not fill in sunny weather or indoors with a bright lamp.
• The protective layer - it responds, actually, for protecting the screen from damage.
• The oleophobous layer - it allows you to get rid of annoying fingerprints and oily shine, and it also has a moisture-repellent ability and greatly simplifies the screenshery process.

Almost everyone protective glasses Now they have rounded edges, which makes it possible to look like the screen not only more accurately, but also allows the edges to not cling to clothes or lining inside it. It should also be borne in mind that a glass of 0.2 mm thick is absolutely not significantly, while 0.33 mm is visually imperceptibly, but if you look at the smartphone on the side, then the glass ends can be seen. What swinging holes under the speakers, the chamber and other sensors, then more expensive glass have neat holes in the glass itself, when cheaper sets are drawn up more "Toporn", all holes have angular edges.

Each model of the smartphone corresponds to a certain glass model, so in the search bar of the Chinese trading platform Aliexpress You need to enter the "Protective Glass" query and add the phone model.

Also, such a type of protection has a number of advantages that cannot be noticed:

• Transparency. Thanks to her, color reproduction and clarity does not decrease.
• Subtlety. This parameter allows the sensor to remain as sensitive.
• Smoothness. Thanks to this property, when using the phone, you will not feel the difference and inconvenience during your finger control.
• The ability to take a given form. Many types of glasses can enhance the nipple or dust under the glass or dust and with time the air formed around them leaves, and it is impossible to see a lack of a lack of a small look.

Regarding sensations, the expensive models of glasses have a more pleasant surface to the touch, while their cheap fellows cannot boast of such properties.

As for the models with a strengthened glass Gorilla Glass, then the opinions of specialists were divided: some believe that additional protection in the form of protective glass is not a necessity, while others are still not averse to being restored. Of course, you can meet a lot of rollers, where over this type of glass of top smartphones are mocked, as soon as possible: and scratch scratches, and pick up, etc. This glass can withstand such mockery, only here there is no guarantee that it is your smartphone that will be an exception to the rule, but to change the screen in the service center will cost as half a new similar model. Therefore, in this case, it is better to bother than to bother. Based on the foregoing, we strongly recommend not to experience fate and acquire safety glass on Aliexpress.

How to stick a protective glass on the phone with Aliexpress?

To properly glue the protective glass on the screen of your gadget, you need to strictly follow the instructions. The process will take you only a few minutes, but you should not hurry and do it "on the go." So, proceed:

1. Prepare a workplace. Most likely, you will choose the table, so it is important to wipe it carefully to get rid of dust and dirt. The air indoor should also be clean and not contain dust flying in it, so it is desirable not to engage in the installation of protective glass immediately after cleaning the vacuum cleaner or wiping the dust.

2. Pull all its contents from the package. Usually, there is the glass itself in a special cule, as well as 2 napkins: wet and dry, in more expensive sets you can meet a microfibrous cloth.

3. If you glue the glass to a new smartphone, then the screen does not need to be degreased, it is enough to remove the transport film from it and install the glass. If you have already enjoyed the phone earlier, it is not necessary to do without careful cleansing.

4. Remove all accessories from the gadget, including a protective case and the previous glass or film. Turn off the phone so that the response reaction of the smartphone to the touch to the screen you is not distracted. Remove the napkin at number 1 and degrease the screen with its help.

5. Next, wipe the screen with a napkin at number 2 or a microfiber rag.

6. Remove safety glass From the kulechka and take it for the side ends. Remove the transport film from the glass by pulling it out for the tongue.

8. Apply the protective glass to the screen surface in such a way that the edges coincide or the indentation from them was uniform on all sides. Also do not forget that the holes for the sensors should also coincide, therefore it is worth "dance" from them. You can also take advantage of the cunning from gluing the film and on the one hand glue the glass on one side of the phone.

9. After you evenly placed the glass, carefully put it on the display surface and press the screen to the center of the screen, after which the glass will begin to crimp the display and the entire air itself will come out.

10. In the case of air bubbles, take a cloth and press on bubbles, kicking them out of the sides.

Liquid protective glass with aliexpress

Prices for protective glasses are rather different and quality changes with them to an equivalent degree. The breakthrough in the protection of smartphones from mechanical damage was liquid glass.

The liquid protector has the following characteristics:

• A wide range of devices covered. You can apply glass to all devices having a display or parts subject to the occurrence of scratches: smartphones, smart phones, tablets, laptops, televisions, navigators, fitness trackers and other devices. Also, the glass has the ability to prevent the sticking of dirt, gear, fat and bacteria.
• Protection without air bubbles. Since the state of the substance is liquid, then the appearance of an irritant in the form of "balloons" can not be speech. In addition, you can apply liquid protector Not only on the display, but also the rest of it, including the rear lid.
• The presence of antibacterial, hydrophobic and oleophobic properties.
• The possibility of using for points as protection against the appearance of prints and divorces, which significantly simplifies the cleaning of the accessory.

This type of protection can be used not only as armor for smartphones, but also serves to protect tablets, laptops, mini televisions, smart, navigators, and other devices with the presence of displays of different types. Such glass was created using nanotechnology and has a number of advantages compared to films and conventional rotable glasses:

• Low price.
• Long protection (one application is enough for a year of use. And if you use neatly, such a glass will be able to serve even longer).
• It is imperceptible on the gadget screen.
• It has antibacterial coating. Given that the greatest number of bacteria accumulates in the hands and follows the display, it will be a plus if it has a coating that prevents the reproduction of malicious representatives of nature.
• Increases the degree of clarity of the picture.
• Also noticeably improves the quality of photographs when processing the camera's eye chamber.
• When making calls, it blocks harmful radiation by 97%.
• Safe for nature.
• Pretty simple in applying even by an ordinary user.
• If moisture gets into the screen, it is going to drop and rolls off it.
• Fully suits dysmpleam with a 3D touch function.
• Does not spare with time as protective glasses.
• Does not complicate the response of the sensor, like thick glasses.
• Not prone to the formation of air bubbles like films.

The kit includes a alcohol napkin for pre-cleansing the screen, the fluid itself and a dry napkin for polishing. All components are numbered, so the user will easily figure out what to do in what sequence.

To install correctly liquid armor Follow our instructions:

1. Order tool on Aliexpress And wait for its delivery.
2. Prepare the work surface, first cleaning it from dust and dirt.
3. Unpack the kit and clean the screen using a napkin under the number 1. If before that you used the protective glass, you must first dismantle it. Wipe the screen at least half a minute to achieve maximum cleansing and disinfection of the surface.
4. Give the screen to dry after cleaning.
5. Next, open the bag at number 2 with the liquid tread inside. Apply the armor and distribute evenly. This can be done using a microfiber rag moistened in the liquid.
6. Let dry no less than 10 minutes.
7. Open the bag at number 3 and polish the glass before the disappearance of the divorces.

Helpful advice! To achieve a more pronounced effect, dry the device within at least 10 hours. In this case, a more durable protective layer is formed. Given this fact, to make such a procedure should be on weekends and before bedtime, so as not to use the gadget maximum time.

Protective glass for iPhone with Aliexpress

After buying such an expensive gadget, like the iPhone, even the most neraddable user will try to save the appearance of the device for a long time. To do this, you need to protect the device from the harmful effects of surrounding factors. To do this, immediately after purchase you need to stick protective glass for iPhoneBut how to choose it and what kind of preference, we will tell you further.

To select the glass, you need to pay attention to the following parameters:

1. Compatibility with the model. Usually, the site shows the models with which the sets are compatible. For reinsurance, you can clarify the data from the seller. It is also important that all outputs for sensors and functional components are compatible with holes on the glass. You can find universal glasses for models 6, 6s, 7, 8, since all of them are similar to external characteristic features. But there are glass that provide for use on a specific smartphone model, so it is still better to first consult with the seller before ordering. Also important in the selection of glass is the cover for the back cover. If it comes on the screen, then there is a high likelihood that when using it will simply rise in the glass, swaying it along the edges.

2. The thickness of the glass and the characteristic of its hardness. Most glasses presented in the market have a hardness of 9H, which protects the glass not only from scratches and chips, but also from drops to a solid surface, taking a blow to yourself. Also there are glass with less hardness, but they are designed to protect the gadget only from scratches. The glass thickness also affects its ability to protect the phone from falling, while even a glass thickness of 0.5 mm does not affect the quality of the image and the response of the sensor.

3. Glass with frame, 3D or color. This parameter is selected for personal preferences. Ideally, you can buy all three options and feel the difference clearly, but it is quite expensive. Many users are prone to buying a 3D option. It is characterized by a color frame and a rounded edge and is made of soft silicone. Thanks to this form, the glass is not palpable on the surface of the phone and does not feel the transition between the glass and the case.

Using this type of glass, choose a cover that does not enter the display.

The second place in popularity occupy glass with a color frame for the color of the device.

This glass also covers the entire screen and has a frame from above and below. Screening like 3d is absent. Some users use colored glasses to change the appearance of the gadget. Stained glass in combination with a bumper case change the appearance of an iPhone to be unrecognizable.

Conventional glass is used for iPhones with covers that enter the surface of the display, these glasses are universal and have a cheaper cost.

Video review for protective glasses for phones with Aliexpress

To get closer to get acquainted with the assortment of protective glasses with Aliexpress And find out the opinion of them from real buyers, you can view video reviews on the links below, and it is possible to find the information you are interested in: